Specification

Suitable For

Not Suitable For

1800 x 800 x 22mm
LINEAR Drain - 800mm length
Brushed Stainless Steel Channel Cover
Optional Channel Cover Upgrades Available
Under Support Required
Height Adjustable Tiling Frame
3 Way Consistent Fall to Drain
Cut to length within 75mm each side of the drain edge
Lifetime Guarantee*

Wood or Concrete Subfloor
Tiled Floor Finish**
Wet Rooms
Level Access
Modern Look
Underfloor Heating

Vinyl Floor Finish
Micro Cement
Use with Wheelchairs
Fitting Direct on Joists

The Impey Aqua-Dec Linear 3 Wetroom Floor Former is a strong 22mm thick wet room tray with 3 pre-formed drainage gradients that provide a level access wetroom floor suitable for a tiled covering, helping deliver a flow rate of up to 42 litres per minute.

Featuring three gradients to assist flow to the linear drain and has a stylish 40mm wide stainless steel linear drain to create a more defined finish and allow for a higher water flow rate - ideal for use with the most powerful showers with body jets.

The linear 3 comes complete with a 800mm linear drain channel capable of flows of 35 - 42 litres per minute (depending on room layout and size of the Aqua Dec). The linear drain is shipped with a brushed stainless steel drain cover as standard. Optional inserts are also available.

Unlike the linear 2 and 4, the Linear 3 can be can be cut to length within 75mm each side of the drain edge to assist with alcove spaces(Except 1200 x 900 size).

Optional Tiled Insert

The Linear Tiled Insert Top is an alternative option from the brushed stainless top supplied as standard with any of the Aqua-Dec Linear and Aqua-Grade Linear floor formers. The Tile insert option is available in a 13mm fixed height from the floor former to the top of the tiling frame.

Impey Designer Drain Covers & Inserts

In addition to the standard brushed stainless steel channel cover, and tileable inserts, Impey also offer a range of designer drain channel covers and inserts

All designer drain tops are manufactured in the UK and laser cut from the highest quality stainless steel specially for Impey wetroom floor formers. The range of designs and finishes add a touch of individual style to the wetroom.

A combination of contemporary and modern patterns provides choice and the option to add a lustrous, high-end designer style to any bathroom. Designed with choice in mind, the Aqua-Dec Linear floor former range helps to achieve the desired look of each unique wetroom.

Black Metallic & Polished Stainless Steel inserts are 13mm fixed height from the floor former to the top of the tiling frame.

Important:
NOT suitable for VINYL floor finish
Under boarding of the Aqua Dec Linear is required.
The Linear flow drain requires a minimum 95mm clearance below the Aqua Dec.
A tanking membrane such as Impey WaterGuard will need to be laid prior to tiling.

*All Impey Aqua-Dec EasyFit bases carry a lifetime guarantee if installed according to the manufacturers instructions.

**If finishing the floor with TILES a tanking membrane such as Impey WaterGuard should be laid first.

Brushed Stainless Steel

Impey Aqua Dec Linear 4 Wet Room Tray & Drain - 1400 x 900 x 22mm

Impey Aqua Dec Linear 3 Wet Room Tray & Drain - 1800 x 800 x 22mm

Side Slope Tile Profile for WetBase® One Infinity by wedi: 1200mm

Side Slope Tile Profile for WetBase® One Infinity by wedi: 1800mm